Remotec Z-URC550 V1 User Manual download pdf (Page 6)

Z-URC

550EU Operations

Welcome to the world of home automation, your Z-URC

550EU will

be able to control all the Z-Wave products around your house. The

following section will guide you through the set up processes for your

Z-URC

550EU. Firstly there is the XpressZetup

for beginner users

that do not have a large amount of Z-Wave products. Following is the

advanced set up that you will need to become familiar with as your Z-

Wave network of products continues to expand.

Please note that all Z-Wave devices, light switches, dimmers, and

shutter switches made from various vendors are compatible with your

Z-URC

550EU

as long as they carry the Z-Wave logo:

(Please carefully read through the following then store the manual for

future reference.)

Before using the Z-URC

550EU, please install the batteries:

• 3xAAA batteries are required for operation.

• Remove the battery cover on the back of your Z-URC

550EU.

• Check the polarity of the batteries and the "+/-" marks inside the

battery compartment.

• Insert the batteries.

• Push the battery cover back in place.

L CAUTION (battery safety)

− Use new batteries of the recommended type and size only.

− Never mix used and new batteries together.

− To avoid chemical leaks, remove batteries from the Z-URC

550EU if you do not intend to use the remote for an extended

period of time.

− Dispose of used batteries properly; do not burn or bury them.

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

No comments

Remotec Z-URC550 V1 User Manual Page 6